Troop 85 Cycling Merit Badge

Inspection

Safety

Before we ride you'll check your bike against this checklist.

_____ Frame (1) - Clean and not bent out of shape.  No cracks at Frame Joints (2).

_____ Front Fork (3) - Clean and not bent out of shape.  No cracks at Fork Joints (4).

_____ Headset Bearing (5) - Well lubricated; turns freely with no binding.  No perceptible play in the assembly.

_____ Bottom-Bracket Bearing (6) - Turns freely with not more than barely perceptible play in the bearing.

_____ Crank Arms (7) - Clean and not bent out of shape.  Tightened securely on the Crankset Axle (8).

_____ Chainrings (9) - Clean, not worn, and not bent out of shape.  Chainring Bolts (10) tightened securely to hold Chainrings to Crankarms.

_____ Pedals (11) - Bearings well lubricated; turn freely with no perceptible play in the bearing.  Pedals tightly screwed into  Crankarm.  Toe Clips (12) functional.

_____ Fenders (13) - Clean; tightly attached without rattling or rubbing against the Tires (14).

_____ Wheels (15) - Run true and round.  Wheel nuts tight.  Closed and tight quick-releases (16).  Centered in form or frame members.

_____ Wheel Bearings (17) in hubs - Well lubricated and properly adjusted to move freely with no more than barely perceptible play.

_____ Spokes (18) - None broken or bent.  Tightened to a uniform tension.

_____ Tires - Good Tread (19).  Valves (20) completely airtight.  Properly inflated to recommended pressure.

_____ Rims (21) - Clean of all oil and grime.  Free of dents or kinks.

_____ Chain (22) - Proper tension, allowing 1/2 inch of play.  No stiff links.  Clean, lubricated, and wiped of excess lubrication.

_____ Gearing (23) - Clean and oiled.  Three-speed gears adjusted to eliminate all slipping.  Front (42a) and Rear (24b) derailleurs    adjusted for proper shifting with Shifters (24c).

_____ Brakes (25) - Even braking.  All nuts tight.  Front and rear brakes work without binding.  Minimum of 3/16 inch of rubber on Brake Pads (26).  Brake pads aligned with rims and contact rims with a minimum of movement of Hand Controls (27).  No squeal when brakes are used.

_____ Cables (28) - No frayed ends.  No broken strands. All taut.

_____ Handlebars (29) - Tightened securely.  Grips (30) not worn; fit snugly.  Adjusted to comfort of rider.  Ends (31) plugged.  In  line with wheel.

_____ Saddle (32) - Height, tilt, and fore/aft position adjusted to rider.  All adjustments securely tightened.  Seatpost (33) not extended  beyond maximum mark on post.

_____ Lights (34) - Front light visible for 500 feet.  Generator or battery in good operating condition.

_____ Rear Red Reflectors/Lights (35) - Visible for 300 feet.  Lights/Blinkers functional with generator or batteries.

_____ Bell or Horn (36) - In good operating condition.  All accessories well tightened and securely fastened.  No broken frames or fasteners.

Mr. LeFave | 1-847-395-1129 | | http://www.tekisp.com/~gene/cmb | Troop 85